TotalBoat 5:1 Epoxy Kit Quart, Slow Hardener

Jamestown Distributors - For dispensing product via pumps, the recommended temperature is 60-70°F. Totalboat 5:1 marine epoxy resin can be applied to fiberglass, wood, reinforcement fabrics, etched aluminum, and bare steel. Quart kit includes 30 fl. Kits contain totalboat traditional 5:1 epoxy resin compare to west System 105, your choice of TotalBoat 5:1 Fast or Slow Hardener compare to West System 205 and 206 hardeners, and calibrated 5:1 measuring pumps.

Of hardener. Totalboat 5:1 epoxy kits contain the traditional 5:1 marine epoxy resin and hardener valued for its high strength and moisture resistance perfect for completing a variety of boat building projects and boat repairs, whether for wood or fiberglass boats. Of epoxy and 6 fl. 4-gallon kits include 4.

TotalBoat 5:1 Epoxy Kit Quart, Slow Hardener - 5 gallons of epoxy and 1 gallon of hardener. At 75°f, pot life is 20 minutes. Easy to apply by brush, syringe, reinforcement fabrics, bare steel, roller, or by pouring onto wood, spreader, fiberglass, etched aluminum, and lead. Self-leveling properties are ideal for coating and laminating. Oz. When combined with fillers, it makes a strong fairing compound, filleting material, or adhesive.





System Three 3105S16 White Silica Thickener, 1 Quart Tub

System Three Resins, Inc. 3105S16 - Alternatively use SilverTip GelMagic for ease-of-use. An excellent thixotropic agent which is used to control viscosity of mixed epoxy systems. Can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging. A 5-quart quantity of silica Thickener when combined with 1 gallon of mixed epoxy/hardener, will produce about 1.

75 gallons of a non-sagging firm paste. Also referred to as colloidal or fumed silica. Silica can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging. This material is also referred to as colloidal or fumed silica, and is an excellent thixotropic agent which is used to control the viscosity of mixed epoxy systems.





Fiberglass Roller Tools Kit, 3pcs Fiberglass Resin Laminating Bubble Roller Set for Tub Shower Bathtub Boat Repair

Lanpn - Package includes: 3pcs fiberglass roller tools set An excellent thixotropic agent which is used to control viscosity of mixed epoxy systems. Also referred to as colloidal or fumed silica. The fiberglass roller tools set is a proper balance of glass and resin with no air pockets. 3pcs fiberglass roller set: 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x corner roller for air relief in crucial filets and corners.

. Can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging. Plastic handles are solvent-resistant for easy cleaning. These aluminum rollers set the industry standard for durability and ease of cleaning.





3 FEET Long - 1708 Fiberglass 45/45 DBM Biaxial 50" Inch Wide - 1 Yard

1708x50x3 - Premium 1708 fiberglass 45/45 dbm biaxial 50" inch wide - 3 feet lONG - 1 YARD An excellent thixotropic agent which is used to control viscosity of mixed epoxy systems. Best quality available from marine Parts and Accessories. 3pcs fiberglass roller set: 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x corner roller for air relief in crucial filets and corners.

Plastic handles are solvent-resistant for easy cleaning. The fiberglass roller tools set is a proper balance of glass and resin with no air pockets. These aluminum rollers set the industry standard for durability and ease of cleaning. This does NOT harm the material. Used by Professionals". Also referred to as colloidal or fumed silica.

3 FEET Long - 1708 Fiberglass 45/45 DBM Biaxial 50" Inch Wide - 1 Yard - Can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging. Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products. Marine parts and accessories offers 1708 inspected an packed bY PROFESSIONAL BOAT BUILDERS.

Note: comes folded as ahown.





TotalBoat TotalFair Epoxy Fairing Compound 2-Pint Kit | Marine Repair Putty for Fairing, Filling & Shaping

Jamestown Distributors - Use above or below the waterline on fiber reinforced plastics FRP, steel, aluminum, and wood. 100% made in the USA. Plastic handles are solvent-resistant for easy cleaning. Apply totalboat 2-part epoxy Primer or TotalBoat TotalProtect Barrier Coat before applying Gelcoat. Compare totalfair to interlux watertite epoxy filler, pro set, System 3 Quikfair, Sculpwood, 3M premium marine filler, Awlgrip Awlfair, 4100, Pettit EZ Fair and other popular 2-part epoxy putties.

Used by Professionals". Ideal for fiberglass, wood, cast iron, decks, topsides, steel, and aluminum repairs on hulls, keels and more. Best quality available from marine Parts and Accessories. Note: comes folded as ahown. Excellent sag resistance for application to overhead, vertical or inclined surfaces. Its 1 to 1 mix ratio by volume changes to a green color when the individual blue and yellow components are mixed properly.

TotalBoat TotalFair Epoxy Fairing Compound 2-Pint Kit | Marine Repair Putty for Fairing, Filling & Shaping - Easily spread this creamy consistent surfacing filler. Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products. 3pcs fiberglass roller set: 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x corner roller for air relief in crucial filets and corners.

Can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging.





TotalBoat Gelcoat White, Quart with Wax

Jamestown Distributors - We know what works and what doesn't. 100% made in the USA. Of gelcoat w/o Wax = 1/4 oz. Of wax additive, 32 oz. Compare to west Marine Gelcoat and Evercoat Gel-Kote. Of wax Additive. Totalboat gelcoats can also be tinted to achieve a desired color. Always mix colorant thoroughly into the gelcoat before adding MEKP.

If thinning, use styrene, not acetone. Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products. Of gelcoat w/o Wax = 2-4 oz. For neutral gelcoat, light green, purple, add 10% polyester resin or gelcoat colorant 12% for yellow, red, & orange. White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY.

TotalBoat Gelcoat White, Quart with Wax - The fiberglass roller tools set is a proper balance of glass and resin with no air pockets. Totalboat gelcoats create a super-smooth, high-gloss finish on top of fiber-reinforced composites. Cured gelcoat can be dewaxed, wet sanded & buffed to a high-gloss, protective finish. Gelcoat without wax is usually used for the initial layer of a layup, but for a tack-free cure, mix in a paraffin wax additive sold separately at a rate of 20 drops per ounce of gelcoat without wax 16 oz.

These aluminum rollers set the industry standard for durability and ease of cleaning. Can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging.





System Three 3145S16 White Glass Microspheres, 1 Quart Tub

System Three Resins, Inc. 3145S16 - Very easy to sand smooth once cured. Mixture can be blended with a small amount of Silica Thickener to prevent sagging. Added to epoxy resin and hardener mix, heat-resistant, they make a good, light-weight fairing compound with good compressive strength. These bulking agents are hollow, clear microscopic spheres that make a low cost, low density filler.

Best quality available from marine Parts and Accessories. Formulated for beautiful results with spray-up and hand layup techniques. Non-sagging, high-viscosity formula has an easily controlled setup time, is easy to apply, and has great coverage. Cured gelcoat sands easily and polishes to a durable, high-gloss finish.

System Three 3145S16 White Glass Microspheres, 1 Quart Tub - Compatible with gelcoat coloring agents made specifically for polyester resin or gelcoat. Available in white & neutral, with or without wax. Note: comes folded as ahown. White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY. Use above or below the waterline on fiberglass, cast iron, steel, wood, aluminum & more.

Marine filler available in a 2-pint kit, for smooth, and a Gallon Kit, swirl, 2-Quart Kit, pinhole, and void-free surfaces. Premium isophthalic npg polyester gelcoat is more durable than standard orthophthalic gelcoat for a variety of boat building and gelcoat surface repair projects.





1.5 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins

Griffco Products LLC - White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY. May be sanded in as little as 3 hours at 80°F. Repair dents, filling, chips, gouges, cracks & other surface imperfections. Easy to use: 1 to 1 mix ratio by volume that changes to a green color when the individual blue and yellow components are properly mixed.

Folded and packaged as shown in pictures. This does NOT harm the material. Lightweight 2-part epoxy putty for fairing, and shaping. Use above or below the waterline on fiberglass, cast iron, steel, wood, aluminum & more. Marine filler available in a 2-pint kit, 2-Quart Kit, pinhole, swirl, for smooth, and a Gallon Kit, and void-free surfaces.

1.5 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins - Premium isophthalic npg polyester gelcoat is more durable than standard orthophthalic gelcoat for a variety of boat building and gelcoat surface repair projects. These aluminum rollers set the industry standard for durability and ease of cleaning. Conforms to mold details better than woven roving. Used by Professionals".

Also referred to as colloidal or fumed silica. Plastic handles are solvent-resistant for easy cleaning. Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products.





1/4" Chopped Strand Mat Fiberglass Fibers Quart

Fasco Epoxies 14 - Includes MEKP catalyst. These bulking agents are hollow, clear microscopic spheres that make a low-cost, low density filler. Note: comes folded as ahown. Uniform strength and stiffness in all directions. Use above or below the waterline on fiberglass, steel, wood, cast iron, aluminum & more. Marine filler available in a 2-pint kit, 2-Quart Kit, swirl, for smooth, and a Gallon Kit, pinhole, and void-free surfaces.

Premium isophthalic npg polyester gelcoat is more durable than standard orthophthalic gelcoat for a variety of boat building and gelcoat surface repair projects. Add to polyester or Epoxy Resins. Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products. These aluminum rollers set the industry standard for durability and ease of cleaning.

1/4" Chopped Strand Mat Fiberglass Fibers Quart - Plastic handles are solvent-resistant for easy cleaning. Add to epoxy resin and hardener mix to make a good, heat-resistant, light weight fairing compound with good compressive strength. Mixture can be blended with a small amount of silica thickener to prevent sagging. Very high density and compression strength.

An excellent thixotropic agent which is used to control viscosity of mixed epoxy systems. Marine parts and accessories offers 1708 inspected an packed bY PROFESSIONAL BOAT BUILDERS.





Chopped Strand Mat 50" x 360" 1.5 Oz - Nordstrand Fiberglass Cloth Roll - E-glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair - Resin & Epoxy Compatible

Nordstrand fgm-450a-diy05 - Very easy to sand smooth once cured. Premium quality cloth with E-glass strands, ideal for molding and mold making. Description premium fiberglass mat This Fiberglass Chopped Strand Mat is marine grade and suitable for boat building and repairs, roofing, pond lining and many other applications. Used by Professionals".

These aluminum rollers set the industry standard for durability and ease of cleaning. The mat is made of high quality E-glass strands. The roll is 50in x 30ft with a weight of 1. 5oz per square foot. The fiberglass roller tools set is a proper balance of glass and resin with no air pockets. Use for "print through" barrier between gel coat and woven roving.

Chopped Strand Mat 50" x 360" 1.5 Oz - Nordstrand Fiberglass Cloth Roll - E-glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair - Resin & Epoxy Compatible - It is quick to wet through and has high absorption. Marine parts and accessories offers 1708 inspected an packed bY PROFESSIONAL BOAT BUILDERS. Conforms to mold details better than woven roving. Repair dents, filling, gouges, chips, cracks & other surface imperfections. Easy to use: 1 to 1 mix ratio by volume that changes to a green color when the individual blue and yellow components are properly mixed.

Note: comes folded as ahown. Also referred to as colloidal or fumed silica.





Fiberglass Roller Tools Kit, 4pcs Fiberglass Resin Laminating Bubble Roller Set for Tub Shower Bathtub Boat Repair

Lanpn - 4pcs fiberglass roller set:1x 5" larger diameter, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x corner roller for air relief in crucial filets and corners. These aluminum rollers set the industry standard for durability and ease of cleaning.

3pcs fiberglass roller set: 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x corner roller for air relief in crucial filets and corners. 1/4" fibers. Add to epoxy resin and hardener mix to make a good, heat-resistant, light weight fairing compound with good compressive strength.

Fiberglass Roller Tools Kit, 4pcs Fiberglass Resin Laminating Bubble Roller Set for Tub Shower Bathtub Boat Repair - Add to polyester or Epoxy Resins. This does NOT harm the material. Lightweight 2-part epoxy putty for fairing, and shaping. Mixture can be blended with a small amount of silica thickener to prevent sagging. The fiberglass roller tools set is a proper balance of glass and resin with no air pockets. Marine parts and accessories offers 1708 inspected an packed bY PROFESSIONAL BOAT BUILDERS.

Marine parts and accessories is the ONLY Authorized Retailer of Vernese Customs Products. White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY.